SUNA ZEBRA Tile Cleaner

Description

SUNA ZEBRA Tile Cleaner is a high-performance, heavy-duty acidic cleaner developed
for deep cleaning of tiles and bathroom surfaces. Built using an advanced acid-based
cleaning system, it eliminates the toughest problems—cement stains, grout marks, rust
spots, hard water scale, soap scum, yellow deposits and stubborn mineral buildup.
The Aqua Blue colour enhances visibility during cleaning, while the no-fragrance
formulation ensures pure strength and maximum effectiveness. Ideal for bathrooms,
kitchens, washrooms, tile floors, wall tiles, and post-construction cleanup.
From rust patches to cement film, SUNA ZEBRA Tile Cleaner restores tiles back to a
clean, bright, like-new finish.

Highlights

‣ Removes rust stains instantly
‣ Eliminates cement, grout & construction stains
‣ Removes hard water marks, salt deposits & limescale
‣ Clears soap scum, yellowing & mineral buildup
‣ Restores original tile shine
‣ Safe for ceramic & vitrified tiles
‣ Perfect for bathrooms & kitchens
‣ Fast action acidic formula (no fragrance)

Claims

‣ Removes cement & grout stains
‣ Removes rust stains
‣ Removes hard water marks
‣ Removes limescale & mineral deposits
‣ Removes soap scum & bathroom yellowing
‣ Restores tile shine
‣ Safe for ceramic tiles
‣ Safe for vitrified tiles
‣ Suitable for bathrooms & kitchens

Ingredients

‣ Acidic cleaning agents
‣ Surfactants
‣ Anti-scaling & rust-removal agents
‣ Colour
‣ Processing aids
‣ No fragrance added

Usage Directions

‣ A. For Regular Cleaning (Diluted)
Mix 20–30 ml SUNA ZEBRA Tile Cleaner in 1 litre of water.
Apply on surface using mop, sponge, or cloth.
Rinse with clean water.

‣ B. For Tough Stains, Cement or Rust (Undiluted)
Apply directly on the stain.
Wait 3–5 minutes.
Scrub with brush or pad.
Rinse thoroughly with water

Where to Use

‣ Ceramic tiles
‣ Vitrified tiles
‣ Bathroom floors & walls
‣ Kitchen tiles
‣ Shower areas
‣ Washbasins (tiles only)
‣ Toilet areas (tiles only)
‣ Construction cleaning
‣ Cement / rust / mineral stain removal

Not For

‣ Marble
‣ granite
‣ kota
‣ mosaic
‣ any acid-sensitive natural stone.

Specifications

‣ Product Type: Acidic Tile Cleaner
‣ Function: Cement, Rust & Hard Water Stain Removal
‣ Colour: Aqua Blue
‣ Fragrance: None
‣ Suitable Surfaces: Ceramic & vitrified tiles
‣ Not Suitable For: Marble, granite & natural stones
‣ Shelf Life: 24 months

Safety Precautions

‣ Avoid contact with eyes and skin.
‣ Wear gloves while using the product.
‣ Do not mix with bleach, acid, or any chemicals.
‣ Ensure proper ventilation during use.
‣ Keep out of reach of children and pets.
‣ If contact occurs, wash immediately with plenty of water.
‣ Store in a cool, dry place away from sunlight.
‣ For external use only

Why Choose

‣ Removes rust, cement & hard water stains
‣ Strong acidic cleaning power
‣ Works instantly
‣ Professional-grade performance
‣ Safe on tiles & joints
‣ Perfect for bathroom deep cleaning
‣ Value-for-money pack sizes

FAQ

Yes, it removes rust spots and iron stains effectively. The acidic formula breaks down
iron oxide deposits, making them easy to wipe away.

No. This product is acidic and not suitable for natural stone. Acidic cleaners can etch
and damage marble, granite, limestone, and other porous natural stones. Use only on
ceramic and vitrified tiles.

Yes, it removes yellowing, soap scum and mineral deposits. The acidic system dissolves
calcium and magnesium deposits that cause hard water staining and bathroom buildup.

Yes, when diluted as recommended (20–30 ml per litre of water). The diluted solution is
gentle enough for regular maintenance cleaning while still being effective.

No, it is 100% fragrance-free for maximum cleaning power. The absence of fragrance
ensures the formula is concentrated solely on cleaning strength without any competing
chemical masks.

For diluted use, apply and rinse immediately. For tough stains (undiluted), allow 3–5
minutes of contact time before scrubbing for optimal results.

Yes, it effectively removes cement residue and discolouration from grout. However, do
not use on marble or limestone-based grout, as the acid will damage it.

Do NOT mix this product with bleach, other acids, or any chemicals. Mixing can produce
toxic fumes. If accidental mixing occurs, immediately stop using, ventilate the area
thoroughly, and leave the space. In case of inhalation, seek fresh air and medical
attention.

Yes, this is one of its primary uses. It effectively removes fresh cement film, dried
mortar splashes, and construction residue from newly laid tiles.

Store in a cool, dry place away from direct sunlight. Keep the bottle tightly sealed. Do
not store near bleach, ammonia, or other cleaning chemicals. Store out of reach of
children and pets.

The product has a 24-month shelf life from the date of manufacture when stored
properly in sealed, airtight containers away from extreme heat or cold.

For ceramic bowl surfaces only—apply diluted solution, allow 3–5 minutes contact time,
then scrub and rinse. Avoid prolonged contact with metal or rubber components inside
the tank.

When used as directed, it is safe on tile joints. However, avoid prolonged soaking of
silicone sealants or caulk, as extended acid contact may soften them over time.

Yes, it works well on outdoor ceramic and vitrified tiles. Use the diluted version for
regular outdoor tile maintenance. For heavy exterior staining, use undiluted and allow
longer contact time (5–10 minutes).

Always wear rubber gloves to protect hands. For sensitive skin, use nitrile gloves under
latex. Wear an apron to protect clothing. In poorly ventilated areas, consider a face
mask. Avoid contact with eyes; wear safety glasses if splashing is a risk.

No. This is a professional-grade cleaning product intended for adult use only. Keep out
of reach of children and pets. Ensure the area is well-ventilated and dry before allowing
access.

SUNA ZEBRA Tile Cleaner delivers professional-grade acidic strength comparable to
leading brands like Harpic Heavy Duty and Roff, but at competitive pricing with faster
action and no added fragrance for concentrated cleaning power.

Yes, you can use a higher dilution ratio (e.g., 10–15 ml per litre) for more delicate
applications or regular maintenance. This reduces cleaning power but minimizes any
surface risk.

Immediately wash the affected area with plenty of clean running water for at least 15
minutes. Remove contaminated clothing. If irritation persists or burns are severe, seek
medical attention immediately.

Yes, it effectively removes limescale from ceramic or chrome shower heads. Soak
affected parts in diluted solution for 30 minutes, then scrub and rinse. For undiluted
treatment, limit contact to 5 minutes to avoid any surface damage.

No, the colour is purely for visibility during application. It rinses away completely with
water and leaves no staining or residue on tiles.

Depending on dilution and application method, one 1-litre bottle can cover
approximately 40–60 square metres for regular maintenance cleaning. Highly soiled
areas may require more product.

Yes, this product is specifically designed for hard water stain removal. It effectively
dissolves mineral deposits common in high hard water areas.

SUNA ZEBRA Tile Cleaner offers excellent value. The 500 ml bottle at ₹150 provides
professional-strength cleaning, while the 5L bulk pack at ₹980 gives the best per-unit
value for commercial or heavy-use applications.